Always set up the jetboard away from water as it's important that the battery is attached in a dry environment. Carefully insert the fully charged battery into the jetboard using the front and rear grips. See chapter "How to insert the battery" for more details.
Put the board leash around your ankle or just under your knee, and make sure to secure it tightly. Attach the magnet key to the designated area at the back of the board. and you will now be able to connect your hand controller to the board.
To connect the hand controller, start by attaching the magnet key to the designated area at the back of the board, then press the hand control throttle all the way down,for up to 5 seconds, until the LED lights begin to flash. Once the connection is established, the LED lights will stop flashing. You are now ready to bring your board into the water to get started! See below tutorial for further details, tips and tricks.